CARRY EXTRA ROUNDS CLOSE TO WHERE YOU NEED ITThis custom item will mount to most Picatinny rails and will hold 5 rounds of .223 (mail for a quote on custom 3D printing services) YOU WILL ONLY RECEIVE 2 PARTS: 1 RAIL MOUNT, AND ONE 5 ROUND AMMUNITION HOLDER
AMMUNTIONS, SCREWS, NUTS, BOLTS, PICATINNY RAIL(S), RULERS OR MICROMETERS ARE NOT FOR SALE The mounting system should work on many Picatinny style tactical rail systems
.These items are custom made on a 3D printer in 2 parts. Therefore please understand that this might be either a bit loose, or a bit tight depending on your rail.Currently available in BLACK
Features: 5x 9/16" (~14mm) center to center hole spacing for either one, or 2 screws to mount for adjustment.
11/32" (~9mm) Ammunition hole with a 7/32" (~5.5mm) gap to allow for easy adding, or removing ammunition
Can be mounted at many angle with just one screw.
You will need to provide your own screws, nuts, or bolts to allow you to join the 2 items together, and to secure it to your rail.
These are the following dimensions: Screw holes - 1/8" (~3.25mm)
Screw head hole - 9/32" (~7mm)
Screw head depth - 1/8" (~3.25mm)
Nut Trap hole - 5/16" (~8mm flat to flat)
This Item was tested by using 2x #6-32 5/16" ( ~8mm) long screw to join the parts, & secure it to the rail.
We will not mail metal parts through the postal system
(the lawyers made me write this)
As with all toys, assembly might be required ;)
This might not be suitable for small children
Ammunition not for sale, you are only buying the rail holder
Screws, nuts, & bolts are not for sale, you are only buying the rail holder
Ruler or Micrometer are not for sale, you are only buying the rail holder
You might shoot your eye out
This is a custom 3D printed item